Omnitronic PM-3010 Bedienungsanleitung Seite 22

14 Channel faders
Level controls for the channels 1-3.
15 Crossfader
For crossfading between two of the channels 1-3, which
can be selected with the assignment switches. In mid-
position, both channels can be heard at the same
volume.
• The crossfader curve can be adjusted with the control
X-FADER CURVE.
• The switch X-FADER REVERSE reverses the assigned
channels for the crossfader.
16 Assignment switches
Select the channel for crossfading with the crossfader. If
crossfading is not required, the channel can be switched
directly to the master signal.
•
left position A: channel switched to side A
•
center position M: channel switched to master signal
•
right position B: channel switched to side B
17 Level LED meter
10-digit LED meter for the channels 1-3; the level is
indicated ahead of the corresponding channel fader
(prefader).
22/31 00043092.DOC, Version 2.0