Omnitronic PM-3010 Bedienungsanleitung Seite 24

25
Level selector switch
Switches the level at the master output between 0.75 V
and 1.5 V.
26 Output ZONE
Stereo output (RCA) for connecting a further amplifier,
e.g. for PA application in a secondary room.
27 Microphone inputs
6.3 mm jacks with free routing facility for connecting
microphones.
28 GND (ground terminals)
Ground clamping screws for turntables connected to the
channels 1-3.
29 Input selector switches
Switches the main inputs between phono and line level.
30 Main inputs
• Stereo inputs (RCA) assigned to the channels 1-3 for
connecting units with line level output e.g. CD players or
turntables.
• With the corresponding input selector switches the
inputs can be switched between phono and line level.
31 Aux inputs
Stereo inputs (RCA) with free routing facility for
connecting units with line level output e.g. CD players or
tape decks.
32 Input SESSION
Stereo input (RCA) for connecting a further DJ mixer for
team routines.
33 Output REC(ORD)
Stereo output (RCA) for connecting a recording unit. The
recording level is independent of the position of the
master control and the output controls ZONE and
BOOTH.
34 Output BOOTH
Stereo output (RCA) for connecting a further amplifier,
e.g. for the monitoring system or PA application in a
secondary room.
35 Master output
Stereo output (optionally XLR, bal. or RCA) for
connecting amplifiers or other units with line level inputs.
36 Power on/off
Press this button to turn the unit on and off.
37 AC connection
Plug in the mains cable of the supplied power unit here
and fix it with the union nut.
24/31 00043092.DOC, Version 2.0