Silvercrest SNOT 1.5A1 Bedienungs- Und Sicherheitshinweise Seite 18

Troubleshooting
Fault
The blades
moves slowly.
The product
will not turn on.
Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
Observe the marking of the packaging materials
for waste separation, which are marked with ab-
b
a
breviations (a) and numbers (b) with following
18 GB/IE/NI
Cause
The battery
4
is empty.
9
The blades
are blocked
and should
be cleaned.
The battery
is empty.
9
Solution
Replace the battery
(see Fig. B).
9
Clean the blades
4
carefully under run-
ning water. Use the
included cleaning
brush
8
that some hairs are
blocking the blade
.
4
Replace the battery
(see Fig. B).
9
4
, if you notice