Silvercrest SNOT 1.5A1 Bedienungs- Und Sicherheitshinweise Seite 17

Cleaning, care and storage
Note: Always switch off the product before cleaning it.
Do not use any corrosive or abrasive cleaning agents.
These might damage the surface of the product.
Take the nose and ear hair trimmer attachment
3
off as shown in Fig. D and clean it carefully under
running water. Then fully dry the nose and ear hair
trimmer attachment before re-installation.
3
Attention: The product is only protected against splash
water. Never immerse it in water. Otherwise, irreparable
damage may result.
If there are still hairs in the blade clean it with the
4
cleaning brush .
8
Occasionally place one or two drops of oil onto the
blade and distribute the oil evenly (see Fig. C).
4
Only use an acid-free oil suitable for electric razor
products.
To store the product, always put on the protective cap
.
1
Keep the product in a cool, dry location.
GB/IE/NI 17