Silvercrest SNOT 1.5A1 Bedienungs- Und Sicherheitshinweise Seite 14

Inserting / replacing the battery
(see Fig. B)
Hold the trimmer body
turn the battery compartment cap
ON mark ( ) on the battery compartment cap
aligned with the inverted triangle mark (
on the bottom of the trimmer body
Then remove the battery compartment cap
the trimmer body
Remove the used battery
Insert a new battery type AA (LR6) in the trimmer
body .
6
Indication: Pay attention to the right polarity. This
is indicated on the bottom of the trimmer body
Put the battery compartment cap
trimmer body
Hold the trimmer body
turn the battery compartment cap
wise until the ON mark ( ) on the battery compart-
ment cap
the bottom of the trimmer body
locked and in the position "OFF".
14 GB/IE/NI
.
6
.
6
is aligned with the OFF mark (
7
firmly and vertically and
6
7
6
, if present.
9
7
firmly and vertically and
6
7
. The product is
6
clockwise until the
is
7
) (see Fig. B)
.
from
7
6
back on the
counter-clock-
) on
.