Simpex BASIC 33609 Bedienungsanleitung Seite 36

trOUBleSHOOtINg
Cookware does
not get hot, error
message on the
display
Hob switches to
standby mode,
error codes are
shown on the
display.
error code list:
E0 No or unsuitable cookware on the hob.
E1 Interrupted circuit/short circuit (IGBT electrode)
E2 Inherent overheating
E3, E4 Voltage applied > 270 V or < 90 V
E5 Interrupted circuit/short circuit (hob)
E6 Hob overheating
36
2024-04 SIMPEX 33609 Basic Induktionskochplatte.indd 36
Cookware cannot be
detected as it is not suitable
for induction cooking.
Cookware cannot be
detected because the base
diameter is too small or is
not centred.
Technical fault
Use suitable cookware
as described in the "Use
suitable cookware"
section.
Place the cookware in the
centre of the hob.
Please note the following
list of error codes and
contact a qualified
specialist workshop if
necessary.
15.07.24 10:00