Simpex BASIC 33609 Bedienungsanleitung Seite 33

OPerAtION
end operation:
• Operation with the timer: The appliance switches to standby mode once the
time set has finished.
• Operation without the timer: Press the
standby mode. The appliance switches automatically to standby mode if no
setting is input for 2 hours.
"– L –" appears on the display and all LED displays switch off. To switch the
appliance off completely it must be disconnected from the mains.
NOte:
The fan continues to run for approx. 2 minutes after the appliance has finished
operating in order to dissipate any remaining heat. Do not unplug the mains plug
until the fan has switched off.
child lock
1. Press the
buttons are locked except for the
longer be modified. However, the operation can be cancelled at any time by
pressing the
The display alternates between the operating setting selected previously (e.g.
"800" if you have set the power to 800 watts) and "L".
2. Press the
display goes off and all buttons can be activated once again.
Automatic pan detection
• The appliance automatically detects the size of the pan.
• The appliance automatically detects whether the pan has been taken from the
hob: "E0" appears on the display and short warning tones are continuously
emitted. After a short period, two long beeps are emitted and the appliance
switches to standby mode.
NOte:
Removing the pan interrupts the function as a result of the automatic pan detection.
Press the button to switch the appliance to standby mode.
2024-04 SIMPEX 33609 Basic Induktionskochplatte.indd 33
button. "L" appears on the display and the LED lights up. All
button.
button for longer than 3 seconds to disable the child lock. The LED
button to switch the appliance to
button and the operating settings can no
33
15.07.24 10:00