Display Setup; Skin (Change) - AX Quadbox HD 2400 Bedienungsanleitung

G. Display Setup
[ : MENU > Setup > System > Display Setup]
MENU
There is a Large graphicVFD display on the front panel of the receiver. This display show various
information like the current menu, channel, HD icon, and so on. You can adjust the brightness of
this display using this menu.
Once you completed this option, press GREEN kdy to confirm the change.
H. Skin
[ : MENU > Setup > System > Skin]
MENU
The receiver is a Linux based set top box there are a lot of Skin available for Linux set top box.
Using this menu, you can use a different Skin other than the default one.
NOTE: It takes some minutes since the change of Skin requires a complete system shutdown.
Please wait patiently until the system reboots with a newly selected Skin.
This manual has been edited in reference to the standard SD skin. It is possible to use freely available
HD skins on the internet apart from the preinstalled HD skin from the receiver .
• Brightness
You can change the brightness of the front
VFD display using LEFT/RIGHT key when the
receiver is in use.
• Standby
You can change the brightness of the front
VFD display using LEFT/RIGHT key when the
receiver is in standby mode.
45