AX Quadbox HD 2400 Bedienungsanleitung Seite 42

In the Network Configuration menu, you will see five sub menus as follows:
① Adapter settings
Through this menu, you can set the basic Ethernet configuration.
• User Interface
YES is used to activate the Ethernet. If you set this option at NO, the Ethernet will not work.
• Use DHCP
YES is used to use DHCP (Dynamic Host Configuration Protocol). If you set this option at YES ,
it will automatically detect the correct IP address. NO is used when you want to use a certain
fixed IP address. In this case, you need to enter correct addresses in each field.
② Nameserver setting
This option is required if you selected not to use DHCP. You need to enter the address of the
Nameserver.
42