SPARX SHARPENER 3 Bedienungsanleitung Seite 30

INSTALLING THE SPARX
SHARPENER 3 PRO BASE
To watch the How-To video, visit
* Sparx Sharpener Base Pro is sold separately.
1
REMOVE THE HEAD UNIT
Lift the Head Unit into the upright position, unscrew the
Thumb Nuts on the side of the Sharpener Head and separate
the Head Unit from the Sharpener Base. Set aside the Thumb
Nuts for use in Step 3.
2
PLACE HEAD UNIT ON THE BASE PRO
Gently place the Sharpener Head Unit down on to the top of the
Sparx Sharpener 3 Pro Base.
MAINTENANCE
26
sparxhockey.com/howto
3
TIGHTEN THUMBNUTS
Reinstall each of the Thumb Nuts (A) back into the Sharpener
Head Unit and the Sparx Sharpener 3 Pro Base.
4
LOCK THE BASE
Lower the Head Unit down into the home position and slide the
latches on each side of the base into the lock postion (A).
A
A