Werbung
Verfügbare Sprachen
Verfügbare Sprachen
There are no user-repairable parts in the Sparx Skate
Sharpener. Refer to "Exclusions" in the Warranty
section for more information. Maintenance of the Sparx
Skate Sharpener is limited to the procedures outlined
in this section.
REMOVING AND EMPTyING
THE SHARPENER BASE
To watch the How-To video, visit
Maintenance Frequency:
Perform the following steps after every
½ Grinding Ring of sharpener use (160 cycles on the Radius Ring™
and the FIRE Ring™) and before moving and/or traveling with the
sharpener.
1
REMOVE AND EMPTY THE SHARPENER
BASE
Remove the Head Unit from the top of the Sharpener Base. To
empty Sharpener Base—wipe completely clean with a damp
cloth (water).
Do not use any solvents or cleaning chemicals in and
around the Skate Sharpener.
2
VACUUM SHARPENER
Without removing the Air Filter, thoroughly vacuum the top, sides,
and around the Air Filter Housing. We recommend using a HEPA
certified vacuum.
3
CLOSE THE HEAD UNIT
Install the Head Unit back onto the top of the Sharpener.
MAINTENANCE
24
sparxhockey.com/howto
REPLACING THE AIR fILTER
To order a replacement Air filter, visit sparxhockey.com/new-filter
To watch the How-To video, visit
Standard Grinding Ring Use
(Radius Rings™ and FIRE
Air Filter
should be replaced every 4
Maintenance Frequency:
The
Air Filter
above are related to the type of
to the maximum amount of usage that an
when using a specific type of
Grinding
Air Filter Button
The
will light up to remind you to replace the
Filter
at the Standard
Grinding Ring
Detailed info regarding Air Filter life is also available in the Sparx
Hockey App.
1
ENTER FILTER REPLACEMENT MODE
Power the sharpener on and click the
carriage will reposition itself away from the Air Filter.
2
OPEN HEAD UNIT AND CLEAN BASE
Open the Head Unit. To empty Sharpener Base—wipe
completely clean with a damp cloth (water).
Do not use any solvents or cleaning chemicals in and
around the Skate Sharpener.
3
VACUUM SHARPENER
Before removing the Air Filter, thoroughly vacuum the top, sides,
and around the Air Filter Housing. We recommend using a HEPA
certified vacuum.
4
REMOVE THE OLD FILTER
Pivot the Filter Clamps (A) so that they are no longer holding the
Air Filter in place.
A
A
sparxhockey.com/howto
Rings™):
The
Grinding Rings
(1,280 cycles).
replacement limits listed
Grinding Rings
being used and refer
Air Filter
should have
Ring.
Use interval ONLY.
Air Filter Button. The
Air
Werbung
