4
SHARPENING SKATES
LOADING A SKATE
*For loading goalie skates and figure skates see the end of this section.
To watch the How-To video, visit
1
LOAD THE SKATE
Press and hold down the
Clamp Lever
With the skate toe pointing right and the laces tucked into the
skate, set the skate into the
blade holder rest on top of the clamps. Center the skate blade
in the
Skate
Clamps. Release the
2
CLOSE THE SLOT COVERS
Move each
Slot Cover
(A) in toward the skate until they touch
the blade holder.
A
OPERATION
12
sparxhockey.com/howto
to open the
Skate
Clamp.
Skate Clamp
slot letting the plastic
Clamp
Lever.
A
We recommend inserting the skate into the Skate Clamp
with the toe pointing to the right. For most skate blades, this
orientation allows for the greatest flexibility in Grinding Ring
height adjustment.