SPARX SHARPENER 3 Bedienungsanleitung Seite 21

5
USING BEAM
To watch the How-To video, visit
The Sparx BEAM is used to ensure your Sparx Sharpener is
TM
perfectly aligned. This step is important for your first sharpening
and future sharpenings to make sure you are consistently aligned.
The Sparx Sharpener comes out of the box aligned in the factory,
but it is important to check your edges after the first sharpening in
case the Sparx Sharpener alignment shifts in transit.
For enhanced sharpening features and to continue to the next step,
you need to download the Sparx Hockey app.
Before proceeding with the Sparx BEAM, we
recommend dowloading the Sparx Hockey App
for enhanced sharpening features. Scan the QR
Code to download now.
TM
sparxhockey.com/howto
1
TURN THE BEAM ON AND CONNECT
Press the power button on the Sparx BEAM and open the Sparx
Hockey app. Head to the BEAM section of the App and begin
the connection process.
2
PLACE BEAM ON SKATE
With the toe of the skate pointing towards you, place the Sparx
BEAM on the middle of the skate blade. Tighten the screw (A)
on the BEAM.
A
OPERATION
17