Dräger Oxylog VE300 Gebrauchsanweisung Seite 24

English |
Removing Oxylog VE300
1. Insert the device in the middle of the upper socket.
2. Press the device into the lower latch until it audibly clicks into place.
3. Make sure that the device is properly secured.
6 Removing Oxylog VE300
6.1 Removing the ventilator from the carrying system holder
Risk of patient injury
Accidentally removed or torn hoses and lines may compromise sufficient supply to the
patient.
► Before removing the device, make sure that all hoses and lines can move freely.
1. Actuate the release lever with the help of the tie rod.
2. Remove Oxylog VE300 from the carrying system holder. Make sure that all hoses and
itself again after a short time.
24
CLICK !
WARNING
lines can move freely.
The device must be removed quickly, as the carrying system holder automatically locks
Instructions for use
|
Carrying system holder for Oxylog VE300