Use Of Voltsense Feature - Ht Instruments Ht100 Bedienungsanleitung

4.3.2 Use of Voltsense feature

Maximum input is 1000VACrms. Do not take any voltage measurement
exceeding this limit in order not to risk electrical shock or damaging the
instrument
1. Switch on the instrument with the
2. Move the instrument close to point of the test (see Fig. 4)
3. The red LED switch on in fixed mode If an AC voltage is detected
Fig. 4: Taking AC voltage detection check
/HOLD key
EN - 9
CAUTION
HT100