dB Technologies IS6T-WP Bedienungsanleitung Seite 16

English
2. CONNECTIONS
CONNECTING AND LINKING THE AUDIO SIGNAL
The audio input and link to another speaker are connected via Euroblock (Phoenix) connectors; the connectors
are protected under a metal panel that is easily removed by unscrewing the four screws securing it to the cabinet.
Connect the audio source (e.g., from an amplifier or another speaker) to the INPUT terminal using the provided
female connectors respecting the polarity markings next to the connectors (positive to positive, negative to
negative). The audio signal can be linked to another speaker in a similar way: connect the LINK output of the
speaker to the INPUT terminal of the next speaker respecting the polarity (positive to positive, negative to
negative).
INPUT LINK
+ -
+ -
AUDIO PARALLEL
SOURCE SPEAKER
IS4T-IS5T-IS6T
Cod. 420120373 REV. 1.3
16