Parkside PDSLG 20 B1 Originalbetriebsanleitung Seite 19

If the power cord of this
•
device is damaged, it must be
replaced by the manufacturer,
their customer service or by a
similarly qualified person in
order to avoid hazards. con-
tact the service centre.
Remove the mains plug when
•
the battery is fully charged
and disconnect the battery
from the charger.
Do not attempt to charge non-
•
rechargeable batteries in the
charger.
Only charge your bat-
•
teries indoors since the
charger is not designed
for outdoor use. Danger
of electric shock.
In order to minimise the
•
risk of electric shock,
pull the charger plug
out of the outlet prior to
cleaning it.
If warm, allow the bat-
•
tery to cool before char-
ging.
Only use accessor-
•
ies recommended by
PARKSIDE. Unsuitable ac-
cessories may cause electric
shock or fire.
Preparation
Information on the batteries
• Switch off the device and remove the
battery from the device before carrying
out any work.
• The rechargeable battery only reaches
its full capacity once it has been
charged several times.
• Charge the battery before using it for
the first time.
Checking the battery charge
level
LEDs
red, orange, green Battery charged
red, orange
red
1. Press the button (2) next to the charge
level indicator button (3) on the battery
(4).
The LEDs of the charge level indicator
show how much charge remains in the
battery.
2. Charge the battery (4) when only the
red LED on the charge level indicator
(3) is illuminated.
Inserting and removing
the battery into/from the
cordless device
WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
NOTICE! Risk of damage! An incorrect
battery can damage the device and bat-
tery.
Inserting the battery
1. Push the battery (4) along the guide in-
to the battery holder.
GB
Meaning
Battery partially
charged
Battery needs to be
charged
19