Bearing Lubrication (Dtr 101+141) - Elmo Rietschle V Serie Originalbetriebsanleitung

8.4.5

Bearing lubrication (DTR 101+141)

The pump must be relubricated at regular intervals.
The two lubrication points are located behind the air-lead cover. Loosen the screws and remove the bonnet.
For optimal grease distribution, re-grease the pump when in operation.
Switch on the pump and fill it with a grease gun.
Fig. 13 Lubrication
Tab. 9 Bearing lubrication table
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Series
DTR 101
DTR 141
1 stroke ≈ 0.5g fat
MAINTENANCE, SERVICING AND DISMANTLING
Number of strokes/grease nipples
10
15
www.elmorietschle.com © Gardner Denver Schopfheim GmbH
Tel. 071 918 60 60, Mail: v-g@prematic.ch
33
|