Occupational Safety; Airborne Noise Emissions; Ergonomics - Elmo Rietschle V Serie Originalbetriebsanleitung

BASIC SAFETY INSTRUCTIONS

2.12 Occupational safety

The pump has been set up in accordance with the Machinery Directive 2006/42/EC and the relevant health
and safety and accident prevention regulations. Before starting repair work, the pump must be de-energi-
sed and depressurised to prevent accidents. Previously removed protective devices must be refitted before
commissioning.

2.13 Airborne noise emissions

According to Directive 2006/42/EC, information on the airborne noise emission of the pump must be provi-
ded. Detailed information can be found in the Machinery Directive under point 1.7.4.2.
Relevant information on the pump (see chapter 9.1)

2.14 Ergonomics

With regard to maintenance and servicing, special behaviour with regard to ergonomics must be taken into
account in accordance with Directive 2006/42/EC Annex i 1.1.6 „Ergonomics":
12
|
www.elmorietschle.com © Gardner Denver Schopfheim GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch Tel. 071 918 60 60, Mail: v-g@prematic.ch