Silvercrest SHE 3 E5 Bedienungsanleitung Seite 16

2 . Replacing the current roller attachment: Press the release button
the roller holder
the main housing
3 . Press and hold the release button
Simultaneously, place the roller holder
the product in such a way that the gears of the roller holder
the roller are above one another .
Note: You cannot remove the roller
˜ Skin care after application
Apply body lotion, oil or cream to the skin .
o
Do not apply any substances (e .g . deodorant) to the treated areas,
which could irritate the skin .
˜ Cleaning and care
Roller holder
[ 2 ]
Note: Clean the roller holder
application . Check whether the surface of the roller
undamaged . To do so, turn the roller and check the surface carefully .
Note: Switch off the product before cleaning and care .
1 . Switch off the product by sliding down the slide switch
shown . (Fig . C)
2 . Put the protective cap
housing
5 ] [
housing . Remove the batteries .
3 . Clean the roller holder
brush after every application .
[ 10 ]
4 . Place the protective cap
Wipe down other parts with a damp cloth, when necessary .
16 GB
. Simultaneously, remove the roller holder
2 ] [
.
5 ] [
and the roller
[ 1 ]
on the roller
[ 9 ]
firmly . Slide the battery compartment cover
and the rollers
[ 2 ]
on the roller holder
[ 9 ]
for the roller holder
[ 7 ]
with roller
[ 2 ]
/ from the roller holder
1 ] [ [ 8 ]
/ :
[ 8 ]
and the roller
2 ] [
/ . Hold the main
[ 1 ] 8 ] [
/
[ 1 ] 8 ] [
[ 7 ]
2 ] [
again .
[ 2 ]
/ on top of
1 ] [ [ 8 ]
and of
2 ] [
/ after every
[ 1 ] [ 8 ]
/ is
[ 1 ] 8 ] [
until "0" is
[ 3 ]
off the main
[ 6 ]
with the cleaning
.
[ 2 ]
for
from
.
2 ] [