Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 54

˜ Adjusting the cone spray
head on the stainless steel
nozzle pipe
(Fig . J)
33 ] [
The cone spray head
stainless steel nozzle pipe
Adjusting the spray pattern
Jet: Turn the tip of the cone spray head
o
in an anti-clockwise direction (loosen the
cone spray head) .
Mist: Turn the tip of the cone spray
o
[ 33 ]
head in a clockwise direction (tighten
the cone spray head) .
˜ Attaching the plastic nozzle
pipe
(Fig . K, L)
Connect either end of the plastic nozzle
[ 10 ]
pipe to the shut-off valve
31 ] [
Push the O-ring
29 ] [
the union nut towards the thread on the
[ 37 ]
shut-off valve .
Turn the union nut
direction until it is tight (Fig . G) .
˜ Attaching the nozzle
accessories
The nozzle accessories
only with the plastic nozzle pipe
The nozzle accessories are not to be assembled
with the stainless steel nozzle pipe
o Insert the desired nozzle accessory
one end of the plastic nozzle pipe
[ 31 ]
o Push the O-ring
29 ] [
the union nut towards the thread on the
nozzle accessory
o Turn the union nut
direction to tighten it on the thread of the
nozzle accessory
52 GB/IE
is pre-installed on the
[ 9 ]
.
[ 37 ]
.
[ 30 ]
, security ring and
[ 29 ]
in a clockwise
12 ] [
are to be assembled
[ 10 ]
.
[ 9 ]
.
12 ] [
into
10 ] [
.
[ 30 ]
, security ring and
[ 12 ]
.
[ 29 ]
in a clockwise
[ 12 ]
.
Choosing the suitable nozzle accessory
Nozzle
Fan nozzle
Double head
nozzle
33 ] [
Single head
nozzle
Mist nozzle
NOTE
u
Only use the nozzles and filters supplied
with the product .
˜ Mixing the spray solution
m
WARNING!
u
Mix the chemicals strictly in accordance
with the manufacturer's instructions .
Incorrect mixtures may produce toxic
fumes or explosive solutions .
u
Mix only the amount of liquid you need
for the application .
Application
Uniform spray pattern
Spraying large areas
Spraying large crops
High flow rate
Spraying small areas
Spraying large crops
Spraying mist
High flow rate