Parkside Performance PRDSP 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 53

2 . Enable the Bluetooth
smartphone .
3 . Open the PARKSIDE app .
˜ Connecting the product
for the first time to the
PARKSIDE app
1 . Select {Add a tool}
tools} tab . The PARKSIDE app scans the
area for available devices . The PARKSIDE
app indicates if available devices have
been found .
2 . Tap on the product name to select the
18 ] [
battery pack .
3 . Tap {Done} to confirm the connection . The
18 ] [
battery pack is listed in the
tools} tab and can be selected .
4 . Select the battery pack
about the product can be found in the
{Your tools} tab if the battery pack is
installed on the product .
NOTE
u
If the connection status LED
light up continuously:
u
Connect the product to the battery
[ 18 ]
pack . Press the power button
5 seconds . The connection status LED
flashes for a few seconds and then lights
up continuously . The product information
is shown in the {Your
u
Only Smart Performance
rechargeable batteries can be connected
to the PARKSIDE app .
u
Upgrading the firmware can change the
features of the PARKSIDE app .
˜ Before use
˜ Attaching the shoulder strap
(Fig . F)
1 . Clip the strap hooks
[ 6 ]
strap to the eyelets
[ 3 ]
tank .
2 . Adjust the length of the shoulder strap
® function on your
or on the {Your
{Your
18 ] [
. The information
17 ] [
does not
14 ] [
for
17 ] [
tools} tab .
6a ] [
on the shoulder
[ 27 ]
on the spray
6 ] [
.
˜ Attaching the stainless steel
nozzle pipe
(Fig . G)
1 . One end of the stainless steel nozzle
9 ] [
pipe has an O-ring
side of the stainless-steel nozzle pipe to the
37 ] [
shut-off valve .
2 . Push the union nut
[ 30 ]
ring towards the thread on the shut-off
37 ] [
valve .
3 . Turn the union nut
direction until it is tight .
NOTE
u
When the stainless steel nozzle pipe
is not in use: Optional – attach the
stainless steel nozzle pipe to the spray
[ 7 ]
tank pin by the hanging hook
easy carrying .
˜ Adjusting the length of the
stainless steel nozzle pipe
(Fig . H)
NOTE
u
Adjust the length of the stainless steel
9 ] [
nozzle pipe to avoid contaminating
yourself, bystanders or the environment .
The stainless steel nozzle pipe
telescoped out .
Extending the stainless steel nozzle pipe
[ 32 ]
1 . Turn the pipe nut
direction until it is loose .
2 . Pull out the stainless steel nozzle pipe
by the tip until it reaches the desired length .
32 ] [
3 . Turn the pipe nut
direction until it is tight .
NOTE
u
To avoid contamination of environment,
operator or bystanders, extend the length
of the stainless steel nozzle pipe
necessary .
[ 31 ]
. Connect this
29 ] [
and the security
[ 29 ]
in a clockwise
[ 9 ]
11 ] [
for
9 ] [
can be
9 ] [
:
in an anti-clockwise
9 ] [
in a clockwise
[ 9 ]
if
GB/IE 51