Warnings And Symbols Used; Introduction; Intended Use - Parkside Performance Pabsp 20V Bedienungs- Und Sicherheitshinweise

The following warnings are used in the instruction manual, short manual, on the packaging and on
Read the instruction manual.
Follow the warnings and safety notes!
Use in dry indoor rooms only.
Wear protective gloves!
Protection class II (double insulation)
CE mark indicates conformity with
relevant EU directives applicable for this
product.
Safety information
Instructions for use
CORDLESS DRILL DRIVER -
PABSP 20V
˜ Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information
concerning safety, use and disposal. Before using
the product, please familiarise yourself with all
of the safety information and instructions for use.
Only use the product as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.

Warnings and symbols used

the rating label:
Switch the product off and remove
the battery pack before replacing
attachments, cleaning and when not in
use.
Protect the battery pack against heat
and continuous intense sunlight.
Protect the battery pack against water
and moisture.
Protect the battery pack from fire.
Alternating current/voltage
Direct current/voltage
Fuse
T3.15A
˜ Intended use
This cordless drill (hereinafter "product" or
"power tool") is designed for inserting, tightening
and loosening screws as well as drilling in wood,
metal, ceramics, and plastics.
The product is not intended to drill into very hard
materials such as cement or concrete.
Always use the correct accessory tools according
to the intended use! Observe the technical
requirements of this product (see "Technical
data") when purchasing and using accessory
tools!
The LED work light on this product is intended
[ ]
to illuminate the immediate work area.
GB 7