Order Numbers; Warranty Conditions - Metasys Eco Ii+ Gebrauchsanweisung

4.5 Disposal of the full collection container
Risk of contamination:
To avoid infection, wear personal protective equipment (hand, eye, nose and
mouth protection) and disinfect and clean the device!
Avoid contact with the contents of the amalgam separator!
Certificates of recycling need to be stored according to national law.
Disposal with ECOTRANSFORM
53 Place the properly sealed amalgam separator into the two styrofoam shells.
Put the amalgam separator in the Styrofoam shells into the transport box (with postal
certification) and close it.
54 Place the appropriate return label onto the transport box for recycling at METASYS logistics
& collection GmbH (more information on the recycling options in your country on www.
metasys.com) .
5.

Order numbers

101000022 Amalgam Separator ECO II+ international, intro kit, central
101000023 Amalgam Separator ECO II+ Germany, intro kit with expansion container, central
Amalgam Separator ECO II+ Tandem Germany, intro kit with expansion container,
101000024
central
EXCOM hybrid A2 - ECO II+ 2 units, 230V, with amalgam separator ECO II+, 0.75
104000012
kW, 180 mbar
EXCOM hybrid A5 - ECO II+ Tandem 3-5 units, 230V, with ECO II+ Tandem, 1.1 kW,
104000014
180 mbar
EXCOM hybrid A5 - ECO II+ Tandem 3-5 units, 400V, with ECO II+ Tandem, 1.1 kW,
104000015
180 mbar
EXCOM hybrid A2 - ECO II+ Germany, 2 units, 230V, with ECO II+ D, with expansion
104000013
container
EXCOM hybrid A5 - ECO II+ Tandem Germany, 3-5 units, 230V, with ECO II+ Tandem
104000016
Germany, with expansion container
EXCOM hybrid A5 - ECO II+ Tandem Germany, 3-5 units, 400V, with ECO II+ Tandem
104000017
Germany, with expansioncontainer
104000011 EXCOM hybrid A1 - ECO II+ 1-2 units, 230V, 50/60 Hz , 0.75 /0.9 kW, 180 mbar
120000630 Cover for ECO II+ / ECO Air incl. adapters
120000631 Expansion container for ECO II+ Germany / ECO II+ Tandem Germany
6.

Warranty conditions

METASYS grants a guarantee of 12-36 months for specific products (duration of guarantee depends
on the product according to the information in the current price list).
The guarantee covers all material faults that more than negligibly affect the function of the device. The
guarantee does not cover damages caused by incorrect or improper handling as well as normal wear.
Furthermore, the guarantee does not apply to the replacement of the amalgam collection container
or to fragile parts such as glass, plastic, hoses, filters, condensate filters or membranes. Any incurred
working and travel times are excluded from the warranty.
In order to determine the validity of the guarantee, the installation proof accompanying the device
must be returned to METASYS immediately after proper assembly has taken place. In this case the
warranty period begins with commissioning. In the event of installation without returning the instal-
lation proof to METASYS, any warranty claim is forfeited. Installation and return of installation proof
must be completed within 24 months from the date of sale from METASYS.
Furthermore, any warranty claims of the customer expire if only one of the following circumstances
arises, regardless of whether the circumstances arise for the customer of METASYS or a later owner
or operator:
• Improper installation, operation, maintenance or transport of the device. If METASYS parts have to
be returned, the original METASYS packaging must be used for shipping. Prior to packaging and
shipping, the METASYS device must be cleaned and disinfected. Any openings where residual
fluids could leak must be closed.
• Installation and return of installation proof have not been completed in the aforementioned 24
months.
• Failure to send the Installation Proof to METASYS.
• Installation and use of non-original METASYS parts.
• Installation of the device by personnel who are neither trained nor authorized by METASYS.
• Occurrence of damages through improper handling and operation or use of unapproved cleaning
and/or disinfecting material, as well as non-compliance with the instructions for use.
• Execution of repairs by unauthorised repair shops or unathorised personel.
• Failure to comply with the prescribed maintenance intervals. Maintenance must be carried out 11-12
/ 23-24 / 35-36 months after installation of the respective METASYS item.
• Missing entries in the Equipment Logbook regarding the installation as well as prescribed servicing
by technicians trained by METASYS.
• Failure to take reasonable immediate measures to avoid further damages in the event of a
malfunction.
• Shipping of devices or components to METASYS without proper accompanying paperwork, in par-
ticular without error description or invoice for the purchase of the device.
• Failure to provide visual images (photos, video clips ...) of the METASYS item complained about, as
well as of its installation situation and ambient conditions.
METASYS reserves the right to demand the documentation supplied with the device to check the
maintenance intervals for the assertion of warranty claims. The processing of warranty claims takes
place exclusively according to the following method:
In the event of malfunctions, the device must be opened by an authorized technician, the relevant
component taken out and sent to METASYS unopened and cleaned. The customer sends the device
or component in question to METASYS at his own expense. METASYS checks whether there is a
warranty claim. METASYS will repair the device or component if it is cost-effective. The customer is
charged for the costs incurred for the repair, but not the replacement parts covered by the guarantee.
The consignment of the device or component to METASYS always represents a repair order for
METASYS. For cost estimates for the repair of returned devices, a processing fee* is charged if the
warranty period has expired or no warranty case exists. For products inspections only without any cost
estimates a processing fee* can be charged. When sending the device or component to METASYS,
an error description with all importation information about the device must always be included. The
customer of METASYS may only provide payment in advance after consultation with METASYS. Only
the affected component is to be sent in (smallest possible unit). If contaminated, intact parts are sent
to METASYS without technical necessity, METASYS is entitled to destroy them without separate pay-
ment. The new part corresponding to the part to be destroyed is only delivered after a separate order
and invoice. In any case, METASYS has the right to handle the guarantee through credit note or the
return of new parts without conducting repairs. Guarantee services do not result in an extension of the
warranty period nor do they initiate a new warranty period. The warranty period for installed replace-
ment parts ends with that for the originally delivered device. The METASYS customer is obligated to
make his customer aware of the conditions regarding the warranty processing. The statutory warranty
rights of the customer remain unaffected.
* The current warranty conditions and fees can be found in the current METASYS price list.
Subject to printing and setting errors!
EN - Instructions for use
15