Operating Elements And Connections; Tone Controls; Level Control - Omnitronic MX-420 Bedienungsanleitung

4.2 Operating elements and connections

1 LED REAR MIC IN
Lights blue when connecting a microphone to the rear
microphone input DJ MIC.
2 Microphone input DJ MIC
• Input for connecting a DJ microphone via an XLR plug
or 6.3 mm plug, as an alternative to the connector on
the rear panel.
• With the corresponding input selector switch at the rear
panel the DJ microphone input can be switched to line
input for mono units with line level output.
3 Buttons CUE
Buttons for monitoring the input channels 1-4 ahead of
the respective channel fader via headphones connected
to the jacks PHONES. With the button pressed, the blue
LED lights to immediately indicate that a channel is
monitored.
4

Tone controls

3-band equalizer for the DJ microphone: TREBLE,
MIDDLE, BASS.
5

Level control

Level control for the DJ microphone.
6 Microphone channel on/off
On/off switch for the DJ microphone channel. With the
button pressed (red LED lights), the DJ microphone is
switched on.
7 Talkover on/off
On/off switch for the talkover function. With the button
pressed (blue LED lights), the levels of the channels 1-4
are automatically attenuated
announcements are made with the DJ microphone.
by 15 dB when
19/26
8 Level LED meter
10-digit LED meter for the channels 1-4; the level is indicated
ahead of the corresponding channel fader (prefader).
9
Assignment switches
Select the channel for crossfading with the crossfader. If
crossfading is not required, the channel can be switched
directly to the master signal.
• left position A: channel switched to side A
• center position M: channel switched to master signal
• right position B: channel switched to side B
10 Crossfader
For crossfading between two of the channels 1-4, which
can be selected with the assignment switches. In mid-
position, both channels can be heard at the same
volume.
11 Fader CUE MIXING
For selecting and crossfading the monitoring signal for
the headphones output:
• left position CUE: The prefader level of the input
channel of which the button CUE is pressed is
monitored.
• right position MASTER: The music program currently
playing is monitored ahead of the master fader and the
output controls MASTER 2 and BOOTH LEVEL.
12 Channel faders
Level controls for the channels 1-4.
13 Level control CUE LEVEL
Level control for the headphones output.
14 Master fader
Level control for the master channel 1.
00041734.DOC, Version 2.0