Herunterladen Inhalt Inhalt Diese Seite drucken

Omnitronic MX-420 Bedienungsanleitung Seite 23

Multichannel mixer
Vorschau ausblenden Andere Handbücher für MX-420:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2
You can connect three microphones: a DJ microphone to the DJ microphone channel DJ MIC and two
further microphones to the microphone channels MIC 1 and MIC 2.
• Connect a DJ microphone via an XLR plug or a 6.3 mm plug to the front input DJ MIC or via 6.3 mm
plug to the rear input DJ MIC. When connecting a microphone to the rear input, the control LED REAR
MIC IN lights at the front panel. With the rear input selector switch it is possible to switch the
microphone input DJ MIC to line input for
• Two further microphones can be connected via 6.3 mm plugs to the rear inputs MIC 1 and MIC 2.
3
For connecting amplifiers, several stereo outputs with individual level controls are available:
• Connect the main amplifiers to the outputs MASTER 1 and MASTER 2, optionally to the balanced XLR
output or to the unbalanced RCA output.
• If a monitoring system is available, connect the amplifier of the monitoring system to the stereo output
BOOTH.
4
For analog sound recordings, connect the recording units to the outputs REC(ORD). The recording level
is independent of the position of the master fader and the output controls MASTER 2 and BOOTH
LEVEL. With an audio interface such as the OMNITRONIC DDI 4x4 you can also digitize the analog
output signal of the MX-420 and transfer it to a computer with USB 1.1 or 2.0 connection.
5
For prefader listening to the input channels or for monitoring the current music program ahead of the
master fader and the output controls MASTER 2 and BOOTH LEVEL, it is possible to connect stereo
headphones to the front input PHONES, optionally via 3.5 mm plug or 6.3 mm plug.
6
Connect the power supply unit to the AC input of the MX-420 and the mains plug to a mains socket.
Use the unit only with the supplied power unit. Always disconnect the mains connector when you wish to
change connections, move the unit to a different place or if it is not used for a longer period.
line level output (e.g. wireless receivers)
mono units with
23/26
00041734.DOC, Version 2.0

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis