Siemens SIMOVERT P 6SE2102–1AA01 Betriebsanleitung Seite 24

Parameter
Description
Number
Analogue Inputs
P04
(continued)
0–10 V input (X11.7)
0–20 mA input (X11.9)
4–20 mA input (X11.9)
P05 RUN/STOP mode
(see section 5.1.1 for
detailed explanation)
P06 Voltage to frequency curve
selection
VOLTAGE
100
VOLTAGE
100
VOLTAGE
100
Display
Setting
(Factory
Setting)
50 400
FREQUENCY
60 400
FREQUENCY
400
87
FREQUENCY
5/7
Notes
007 0 V = minimum frequency P07.
10 V = maximum frequency P08.
008 0 mA = minimum frequency P07.
20 mA = maximum frequency P08.
009 4 mA = minimum frequency P07.
20 mA = maximum frequency P08.
(000)
Note: Additional fixed frequencies are
programmable using parameter P24, which
overrides this operating mode.
000 Ramp–down; edge–triggered; trip inactive.
001 Ramp–down; level–triggered; trip inactive.
002 Free run; edge–triggered; trip inactive.
003 Free run; level–triggered; trip inactive.
004 Ramp–down; edge–triggered; trip active.
005 Free run; edge–triggered; trip active.
006 Ramp–down; level–triggered; trip active.
007 Free run; level–triggered; trip active.
008 Ramp–down; push–button control.
009 Free run; push–button control.
(000)
000 Linear 0–50 Hz
100% 50–400 Hz
001 Linear 0–60 Hz
100% 60–400 Hz
002 Linear 0–87 Hz
100% 87–400 Hz
English