Selve commeo Betriebsanleitung Seite 33

commeo initial operation/Setting
If multiple receivers have been found, the selected receiver can be changed by press-
ing the SELECT button for 1 second. The next receiver will perform a brief confirma-
tion run. Only one receiver can be selected at one time for moving, setting and pro-
gramming.
SELECT mode
Receiver X
Exit SELECT mode
To exit SELECT mode (the status LED will flash slowly in orange), press the
SELECT button for 3 seconds.
3 s
Status LED indicator on the transmitter for the various operating modes
Transmitter mode
Operating mode
SELECT mode
CONFIGURATION mode, see
online supplementary
instructions
Power interruption/
programmed transmitter
Receiver 1
SELECT 1 s
SELECT 1 s
Receiver 3
Indicator on status LED
Lights up when a button is pressed
Flashes slowly in orange
Flashes slowly in green or red
SELECT 3 s
Receiver 2
33
SELECT 1 s
SELECT 1 s
EN