Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
DE
DE
DE
•
Turn off the machine before correcting defects on
the machine. Pull out the plug.
•
Persons who do not understand how the machine
works should not operate it.
•
Only do maintenance work, or change filters or
hoses when the machine is unplugged.
•
In areas where there is a danger of explosion, only
special "ex-protected units" may be used.
•
Only use original parts.
•
Check the machine for proper functioning before
every start-up.
•
Do not use the machine at temperatures below
0° C. There is a danger that the housing could be
damaged.
•
When leaving the workplace, turn off the motor.
Unplug the machine.
•
Even when the machine has to be shifted slightly,
unplug it from an external source of current! Be-
fore it is started up, reconnect the machine to the
power source!
Attention! If the electrical cable is damaged, it
must be replaced by the manufacturer, its custom-
er service department or other similarly qualified
persons. The machine is not suitable to be used to
suck up flammable liquids.
7. Intended Use
Attention!
The extraction unit is solely to be used to clean
standing stoves and chimneys for wood burning
when they are cold.
Do not extract smouldering or burning objects.
Do not suck up water or other liquids.
Do not suck up poisonous or acidic materials.
Do not use the machine on oil-burning ovens or
heating tanks.
•
The machine conforms to the valid EU machine
guidelines.
•
The machine has been built according to the cur-
rent technical standards and safety regulations.
Nonetheless, its use could bring about danger to
the body and life of the user or other persons, or
could lead to impairment of the machine and other
material assets.
•
Only use the machine when it is in a technically
perfect condition, and only use it in appropriate
manner, aware of the potential dangers and ac-
cording to the operating instructions! In particu-
lar, correct (or have corrected) immediately any
defects that could lead to a compromising of the
machine's safety.
•
Please note that our equipment is not constructed
for commercial, trade or industrial use. We take no
responsibility when the unit is used in commercial,
trade or industrial contexts or for purposes that are
comparable to the same.
•
Check the filters regularly for damage. Replace
damaged filters! Check the housing and the gas-
kets regularly.
•
When using the cleaning jet, do not suck up any
foreign bodies such as screws, nails, scraps of
plastic or wood.
•
The machine should be operated only with the
manufacturer's original parts and accessories.
•
Do not extract wood dust and saw dust in industrial
settings.
12 І 32
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
•
Any uses beyond those described here are con-
sidered inappropriate. The manufacture does not
take any responsibility for damages resulting from
inappropriate use; any risks and responsibilities
shall be borne by the user alone.
•
The manufacturer's safety, operating, and
maintenance regulations, as well as the param-
eters given in the technical data must be complied
with.
•
Pay attention to suitable accident prevention regu-
lations and all other, generally recognised safety
rules.
•
The machine may be used, serviced and main-
tained only by those persons who are familiar with
it and who have been instructed about potential
dangers. Unauthorised changes to the machine
nullify the manufacturer's liability for any damages
that result therefrom.
•
Only use the machine with original, manufacturer's
accessories.
8. Residual risks
The machine has been built according to the most
current technical standards and recognised safety
rules. Nonetheless, when working with it, certain
residual risks remain.
•
There is a health risk associated with dust. It is
imperative to use personal protection equipment
such as safety goggles and a dust mask.
•
It is possible to breathe in dust when closing and
changing the receptacle. If the directions for dis-
posal as given in the operating instructions are not
followed (for example the use of dusk masks P2),
dust can be inhaled.
•
There is a health risk associated with noise.
The acceptable noise level is exceeded when
working with the machine. It is imperative to use
personal protection equipment such as ear protec-
tion.
•
There is a danger associated with electrical current
if improper electrical wiring is used.
•
In spite of all preventive measures, some hidden
residual risks remain.
•
Residual risks can be minimised if the operating
instructions as a whole and, in particular, the sec-
tions on "Safety Instructions and Appropriate Use"
are complied with.
9. Assembly
Fig.1
1. Take the machine out of the packaging.
2. Release both locking hooks.
3. Remove the unit head from the receptacle and
remove all parts.
4. Assemble the suction tube (pos. 5) and the extrac-
tion hose (pos. 4).
5. Put the other end of the suction hose into the intake
nozzle (pos. 3).
6. Put the head back onto the unit, making sure that it
is placed correctly, and secure it with both locking
hooks.
Operation
Turn on the motor
Put the switch into the position "on".
Turn off the motor
Put the switch into the position "off".
Werbung
Kapitel
Inhaltsverzeichnis
