Using The Product; Connecting A Sensor; Programming Data Logger; Service & Support - testo 175 Bedienungsanleitung

Pos: 31 /TD/Überschriften/6. Produkt verwenden @ 0\mod_1173774928554_79.doc @ 328 @ 1
7

Using the product

Pos: 32 /TD/Erste Schritte/testo 175/Fühler anschließen @ 6\mod_1274957942556_79.doc @ 61981 @

7.1. Connecting a sensor

Observe the following points when connecting sensors to
data logger and measuring points.
> Ensure correct polarity of the plugs.
> Press the plugs firmly into the ports to ensure leak
tightness. However, do not apply force!
> Make sure that the plugs are firmly connected to the
data logger or that the connections are closed with
blanking plugs.
> Ensure correct positioning of the sensor to avoid
disturbing influences affecting the measurement.
> testo 175 T3: Always make sure that you connect the
sensor configured (via the software testo ComSoft) to
the individual sockets. The numbers of the connections
are printed on the housing.
Pos: 33 /TD/Produkt verwenden/testo 174-neu/Hinweis Datenlogger programmieren @ 5\mod_1264769275750_79.doc @ 56853 @

7.2. Programming data logger

In order to adapt the programming of your data logger to
your individual requirements, you require the testo
ComSoft 5 Basic software. It is available in the Internet as
a free download requiring registration www.testo.com,
International,
The instructions for the installation and operation of
the software can be found in the testo ComSoft 5
Basic instruction manual that is downloaded
together with the software.
Pos: 34 /TD/Produkt verwenden/testo 175/Menüübersicht @ 7\mod_1284635393673_79.doc @ 72313 @
Service&Support
7 Using the product
| Download Center.
47