KEB COMBIVERT Bedienungsanleitung Seite 47

Operator Parameter
8. Operator Parameter
The LCD operator must be connected to the HSP5 diagnostic interface of the appropriate operator
for representation of operator parameters.
The operator can load the appropriate parameters if a valid confi guration number is recognized.
Operation takes place like the inverter parameters.
Either a confi guration fi le can be selected via function key F2 or the last used confi guration fi le
can be taken via function key F4 if no confi guration number is recognized.
Parameters for the ope-
rator
Top Bottom
F1
F2 F3
Estimate device
confi guration...
Operator parameter
not present
Select
F1
F3
F2
F4
Last
F4
GB - 21