Dometic POWER & CONTROL CAM360AHDHD Montage- Und Bedienungsanleitung Seite 21

NOTE
• Avoid reflective surfaces and strong shadows when positioning the calibration mats.
• Cover reflective surfaces such as the windshield with a cloth.
• Each calibration mat must be completely visible in the video system.
1. Attach the calibration mats at each corner of the vehilce using the abhesive tape.
Fig.  on page 9
2. If necessary, apply colored tape in straight lines at a distance of 10 cm around the vehicle.
NOTE The colored tape must be fully visible in the video system.
3. Switch on the vehicle ignition to activate the video system.
4. Set up and configurate the video system.
Follow the instructions in the configuration guide (see
9 Disposal
Recycling products with non-replaceable batteries, rechargeable batteries, or light sources:
• If the product contains any non-replaceable batteries, rechargeable batteries, or light
sources, you don't have to remove them before disposal.
• If you wish to finally dispose of the product, ask your local recycling center or specialist deal-
er for details about how to do this in accordance with the applicable disposal regulations.
• The product can be disposed free of charge.
Place the packaging material in the appropriate recycling waste bins wherever possible. Consult
a local recycling center or specialist dealer for details about how to dispose of the product in accor-
dance with the applicable disposal regulations. The product can be disposed free of charge.
Related documents).
19