Removing The Prismaconnect Module - Lowenstein Medical Prismaconnect Gebrauchsanweisung

4 Preparation and operation
Result
4.2 Removing the prismaCONNECT
The symbol appears in the display of the therapy
device.
prismaCONNECT has been connected.
module
1. Press the release catch on the module.
prismaLINE
(WM100TD)
prismaVENT
(WM110TD, WM120TD)
2. Remove the module sideways from the therapy device.
3. Seal off the system interface on the therapy device again
using the cover.
prismaCONNECT EN 41