Preparation And Operation; Connecting The Prismaconnect Module - Lowenstein Medical Prismaconnect Gebrauchsanweisung

4 Preparation and operation

4 Preparation and operation
4.1 Connecting the prismaCONNECT
module
You can use the module with the following therapy devices
and modules:
• prismaLINE series (WM100TD)
• prisma VENT series (WM100TD/WM120TD)
• prismaPSG (WM100MP) - connection and use are
explained in the instructions for use of the prismaPSG
module.
• prisma HUB (WM090MC) - connection and use are
explained in the instructions for use of the prisma HUB
module.
1. Place the therapy device on a level surface (e.g., a table).
2. Switch on the therapy device (see instructions for use of
the therapy device).
You can also connect the module when the therapy device
is switched off. Then switch on the therapy device.
3. Open the system interface cover on the right-hand side
of the therapy device.
prismaCONNECT EN 39