2.
Insert the charging cable (delivered with fan - USB Type C connection) in the charging
connection of your Cordless Foldable Fan.
3.
Connect the other end of the charging cable (USB A connection) to:
- The USB mains adapter (max. 2 Ampere)
- The USB car charger (max. 2 Ampere)
- The USB A port
4a. Insert the USB mains adapter in the socket (220/240 Volt 50 Hz).
4b. Connect your USB car charger to a DC-cigarette lighter connection.
5.
After charging, disconnect all the connections.
If the fan is switched off during charging, the LED lights indicate the charge level. See the
table below:
Battery power
<25%
Between 25 and
49%
Between 50 and
74%
Between 75 and
99%
100%
Switch off the fan during charging. If you want to use the fan during charging, then switch
the fan to a quiet, low or medium speed. The fan might switch off automatically if you put
the fan on a high speed during charging.
Checking the battery power
By pressing the On/Off button 1.5 seconds, you can check the battery power level when
the fan is switched off. The number of burning LEDs indicates the level of the remaining
power.
Battery power
< 25%
Between 25 and 50% On
Between 50 and 75% On
Between 75 and
100%
If the battery is not sufficiently charged to power the fan and you press the On/Off button,
all four LEDs will blink 5 times rapidly and simultaneously and the fan will not turn on. First
charge the battery of the fan.
LED lamp 1
Slow blinking
Off
On
Slow blinking
On
On
On
On
On
On
LED lamp 1
On
Off
On
On
On
On
LED lamp 2
LED lamp 3
Off
Off
Slow blinking
Off
On
LED lamp 2
LED lamp 3
Off
Off
On
On
22
LED lamp 4
Off
Off
Off
Slow blinking
On
LED lamp 4
Off
Off
Off
Off