x-sense SC07-WX Bedienungsanleitung Seite 6

Silence Mode
LCD Display
Mode LCD Display
First-time use
without
connecting to
the Wi-Fi.
Powering
On
The battery is
replaced and
the device has
connected to
the Wi-Fi
before.
Standby Mode
Unit detects
smoke and
initiates an
alarm.
Alarm
Mode
LED Indicator Audible Remarks
Alarm
Runs through 8 cycles 1 quick beep. Make sure the
(yellow/green/red) in battery insulating
sequence. film is removed and
the device is turned
on.
The LED indicator Make sure the
flashes blue until the battery is properly
Wi-Fi connection is installed and the
successful. device is turned on.
Flashes green once None. None.
every 60 seconds.
Flashes red 3 times 3 long beeps Dangerous smoke
concentration is
every 4 seconds. every 4
detected. The app
seconds.
will show a "Smoke
Alarm Triggered"
message, and an app
push notification will
be sent to your
smartphone.
Open nearby
windows and doors,
and immediately
move to fresh air.