Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When settine up machine
• A void using machine in wet, damp or poorly lighted work areas
• Be sure that the machine has all necessary guards.
• Wiring should be done by a qualified electrician.
• Be sure that the machine is anchored securely to floor.
• When delivered the machine is protected by rust proventive. Wash the machine
carefully, specially the tool fastening of drill spindle. Avoid using too much
dissolvent since it also dissolve the grease.
• Make sure that the machine has not been damaged <luring the transport. If this is
the case, please get in touch with the transporter and our representative
immediately.
• The machine is delivered without oil in the feed gear box. Fill machine oil up to
level plug, about 0,25 1, before starting the machine.
When using machine
• Never operate with machine guard missing.
• Follow current instruction conceming personal protective clothing.
• Never wear loose clothing or jewellery which can get caught in moving parts. If
necessary use hair-net.
• Never over-reach. You may slip and fall into machine.
• � ever leave machine running while away from it.
• Always shut machine off when not in use.
When servicine machine
• Always unplug machine from electric power before servicing.
• Always follow instructions given in this operators manual.
• Never modify machine without consulting our representative.
15
Werbung
