Bosch EasyDistance 20 Originalbetriebsanleitung Seite 24

24 | English
Operation
Starting Operation
Never leave the measuring tool unattended when
u
switched on, and ensure the measuring tool is switched
off after use. Others may be dazzled by the laser beam.
Protect the measuring tool from moisture and direct
u
sunlight.
Do not expose the measuring tool to any extreme tem-
u
peratures or variations in temperature. For example, do
not leave it in a car for extended periods of time. In case of
large variations in temperature, allow the measuring tool to
adjust to the ambient temperature before putting it into op-
eration. The precision of the measuring tool may be com-
promised if exposed to extreme temperatures or variations
in temperature.
Avoid substantial knocks to the measuring tool and
u
avoid dropping it. After strong external influences on the
measuring tool, you should always carry out an accuracy
check (see "Accuracy Check", page 26) before further
work.
Switching On and Off
Press the button to switch the measuring tool and the
laser on.
Press and hold the
tool.
If no button on the measuring tool is pressed for approx.
10 min, the measuring tool will switch off automatically to pre-
serve the non-rechargeable batteries.
1 609 92A 7WZ | (16.06.2023)
button to switch off the measuring
Bosch Power Tools