Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Digital laser measure
D)
Battery life
(LR03, continuous
measurement)
A) When measuring from rear edge. In unfavourable conditions such
as very strong lighting, a temperature greatly deviating from 20 °C
or a poorly reflecting surface, the measuring range can be restric-
ted.
B) This applies for high reflectivity of the target (e.g. a wall painted
white), weak background lighting and a 20 °C operating temperat-
ure; a deviation of ±0.05 mm/m must additionally be factored in.
In unfavourable conditions such as strong lighting, great heights or
a poorly reflecting surface, and at a temperature of 20 °C, the de-
viation can be ±5 mm; a deviation of ±0.15 mm/m must addition-
ally be factored in.
C) Only non-conductive deposits occur, whereby occasional tempor-
ary conductivity caused by condensation is expected.
D) At an operating temperature of 20 °C
The serial number (6) on the type plate is used to clearly identify your
measuring tool.
Inserting/Changing the Battery
Always replace all the non-rechargeable batteries at the
same time. Only use non-rechargeable batteries from
the same manufacturer and which have the same capacity.
When inserting the batteries, ensure that the polarity is
correct according to the illustration on the inside of the
battery compartment.
Take the non-rechargeable batteries out of the measur-
u
ing tool if you are not using it for a long time. The non-re-
chargeable batteries can corrode and self-discharge during
prolonged storage.
Bosch Power Tools
EasyDistance
20
25
> 5 h
1 609 92A 7WZ | (16.06.2023)
English | 23
30
Werbung
