Jacuzzi VIRTUS PRO Vorinstallationsblatt Seite 23

damage is not covered by the warranty.
The support base must hold the hot tub load, taking
into account the "Weight" tables above.
P
Prolonged sun exposure could damage the material
of whic h is made the spa shell, due to its capacity to
absorb heat (dark colours in particular). Don't leave
the spa to sun exposure without adequate protection
when not in use (cover thermal, gazebo, etc.).
Any damage arising by not following these warnings
are not covered by the guarantee.
Q
The evaporation of water in the spa may lead to very
high levels of humidity, particularly when the ambi-
ent temperature is high. Natural or forced ventilation
will help preserve the users' comfort and reduce dam-
age caused to the building by humidity.
Note: To reduce heat loss, use an insulating material be-
tween the bottom of the hot tub and the area it is resting
on. This material must be suitable for use in environments
that may contain significant concentrations of chlorides and
acidic substances such as swimming pools and hot tubs.
Q
Make sure any paving, furnishings, walls, etc. present
in areas adjacent to the spa are suitable for use in the
conditions mentioned above.
Jacuzzi Europe S.p.A. © 2023
P
The hot tub must be installed so that any quantities
of water (due to leaks and / or atmospheric events)
are disposed of away from it.
Especially if the hot tub is installed partially (
or fully recessed (
there is no water stagnation; in this case, it is also
necessary to ensure accessibility to the hot tub from
all sides and the removal of the side panels, in or-
der to access the electromechanical parts and the
hydromassage jets in case of maintenance and / or
breakdowns.
SPAPACK
(the following also applies to the spa-pack booster kit; please see
also the relative documentation).
The support base must hold the hot tub load, taking into ac-
count the "Weight" tables above.
To ensure the spa-pack functions correctly, take not of the
specifications in 7. Avoid bends wherever possible (we rec-
ommend using PVC hoses).
For optimal system operation, the spa-pack should be in-
stalled on the same level as the hot tub or, if necessary, on a
lower level (see 7).
The spa-pack must be installed in a closed but ventilated
space which can only be accessed using a key or tool, protected
from water and weathering.
N.B. As some settings and standard maintenance require access to
the devices in the spa-pack (setting the heating temperature, back-
washing the filter,
emptying the system, etc.), we recommend ensuring easy access for
the system manager.
The devices used to limit access to unauthorised persons must
also take into account protective electrical factors (direct and
indirect contacts) and the characteristics of the materials used.
Specifically, any cladding panels or structural parts, where made
from a conductive material, must guarantee a connection to the
earthing circuit and the additional equipotential connection
where relevant and necessary for the type of installation.
Where plastic, wood, etc. are used, ensure that they are cer-
tified for use with electrical installations, including in terms
of their self-extinguishing properties.
HOT TUB / SPAPACK
Any excavations and ducts required for the electrical or
plumbing connections with the spa-pack or the drainage points
must be prepared in advance (
COMPENSATION TANK
When possible, it must be installed near the Hot tub for opti-
mum efficiency (excess water will fall into the compensation tank).
For correct operation of the compensation tank, comply
with the dimensions provided (
23
6), it is necessary to check that
2a-b-c, 5).
( 2b/c)
7).
Jacuzzi Europe S.p.A. © 2023
5)