Palmer supreme soaker Bedienungsanleitung Seite 16

USER MANUAL
CARE, MAINTENANCE AND REPAIR
In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned and, if necessary,
serviced. The maintenance requirement depends on the intensity of use and the environment in which it is used.
We recommend a visual inspection before each operation. Furthermore, we recommend carrying out all the
applicable maintenance measures specified below once every 500 operating hours or, in the case of a lower
intensity of use, at the latest after one year. Warranty claims may be limited should defects result from inadequate
service and maintenance.
WARNING! Before carrying out any care or maintenance, the power supply – and, if possible, all device
connections – must be disconnected.
PLEASE NOTE! Improper care can lead to impairment of the device or even its destruction.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can penetrate the
device.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, make sure that
damage to the device is prevented (e.g. fans must be blocked in this case).
3. Cables and connectors must be cleaned regularly and dust and dirt must be removed.
4. In general, no cleaning or disinfection agents or abrasive agents may be used, as they may damage the
surface finish. Solvents in particular, such as alcohol, can impair the function of housing seals.
5. Devices must generally be stored dry and protected from dust and dirt.
MAINTENANCE AND REPAIR (qualified personnel only)
DANGER! There are live components in the device. Even after disconnecting the mains connection, there
may still be residual voltage in the device, for example, due to charged capacitors.
PLEASE NOTE! There are no user-serviceable assemblies in the device.
PLEASE NOTE!Maintenance and repair work may only be carried out by qualified specialist personnel
authorised by the manufacturer. If in doubt, consult the manufacturer.
PLEASE NOTE! Improperly performed maintenance work may affect warranty claims.
EN
16