Geberit Piave Instandhaltungsanleitung Seite 71

Menu item Description
[EN]
[DE]
Flush time for interval flush
41
Is active when menu item 34
[IntFlushT]
[Interval flush] is set to [1] or
[IntervSpZ]
[2].
Flush interval for interval
42 flush
[IntervalT]
Is active when menu item 34
[IntervalZ]
[Interval flush] is set to [1] or
[2].
Run-on time
In normal operation mode
43
(menu item 30 = [A]) the tap
[RunOnTime]
continues to flush for the run-
[NachlaufZ] on time after the object has
been removed from the
detection range.
Running time for water saver
In water saver operation mode
44
(menu item 30 = [B]), the tap
[WSaverT]
flushes as long as an object is
[TWSparenZ]
in the detection range, but not
longer than the water saver
running time.
45 Set detection range
[DetectRng]
The detection distance can be
[Erfassdis] set to 5 different levels.
Sensor operation (top)
• [Off]: Upper IR sensor is
switched off. (It is not
possible for both IR sensors
to be switched off at the
46 same time.)
[SensorUp]
• [Static]: IR sensor reacts to
[SensOben]
static or moving objects.
• [Dynamic]: IR sensor only
reacts to moving objects.
• [Auto]: IR sensor switches
automatically to the appro-
priate mode if required.
18014405534287371 © 11-2021
970.667.00.0(00)
Application
–
–
• To clean utensils
• To reduce the water
consumption
• To extract a certain
amount of water
• To optimise user recog-
nition
• To improve detection in
case of external
influences (e.g. highly
reflective objects in the
room)
Area Factory setting
1–200 s 5 s
1–168 h 24 h
0–30 s 2 s
3–30 s 10 s
0–4 [...]
Wall-mounted
[0] = short
tap: 4
distance
Deck-mounted
[4] = large
tap: 3
distance
[0] = Off
[1] = Static
Auto
[2] = Dynamic
[3] = Auto
EN
3 / 4
71