Geberit Piave Instandhaltungsanleitung Seite 70

EN
Menu item
[EN]
[DE]
24
[CleanMode]
[Reinigung]
Programmes
30
[MainProgr]
[Hauptmenü]
31
[Esaver]
[E Sparen]
34
[IntFlush]
[IntervSp]
Parameter
40
[ESaverT]
[EnerSparZ]
70
Description
Activate cleaning mode
The flush actuation is
suppressed for 10 minutes.
The function can be stopped
early by re-establishing the
connection with the Geberit
Service Handy.
Operation mode
• Normal operation: The tap
flushes as long as an object
is in the detection range. A
run-on time (menu item 43)
can be set if necessary.
• Water saver: The tap flushes
with a restricted time (menu
item 44).
Economy mode
The reaction speed of the IR
sensor reduces after the
starting time has elapsed
(menu item 40). The starting
time starts after the last use.
Interval flush
• User-controlled: A flush is
actuated at the end of the
[flush interval] (menu item
42), whereby the flush
interval is restarted with
every use. The flush time is
determined by the [interval
flush flush time] (menu item
41) value.
• Interval-controlled: A flush is
actuated at the end of the
[flush interval] (menu item
42), regardless of the number
of uses. The flush time is
determined by the [interval
flush flush time] (menu item
41) value.
Starting time for energy
saver
If economy mode (menu item
31) is activated, the reaction
speed of the IR sensor slows
down once the starting time
has elapsed.
Application
• To clean the tap and
the washbasin without
the water running
• To reduce the water
consumption
• To extend the battery
lifetime
• To fill the trap in the
case of low user
frequencies
• To flush out standing
water in the pipe
(hygiene function – to
prevent stagnation)
• To extend the battery
lifetime
Area Factory setting
Start = <OK>
–
Stop = <OK>
[A] = Normal
operation Normal
[B] = Water operation
saver
On = [ON]
Off
Off = [OFF]
[0] = Off
[1] = User-
User-
controlled
controlled
[2] = Interval-
controlled
6–48 h 6 h
18014405534287371 © 11-2021
970.667.00.0(00)
2 / 4