Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.0 Transport and Storage
Please keep the original packaging for later transport, e.g.
for calibration. Any transport damage due to faulty pack-
aging will be excluded from warranty claims.
Instruments must be stored in dry and closed areas. In the
case of an instrument being transported in extreme tem-
peratures, a recovery time of minimum 2 hours is required
prior to instrument operation.
3.0 Operator's Safety
The UNITEST Phase Rotation Indicators are built and test-
ed in compliance with the safety regulations for Electronic
Measuring Instruments EN 61010-1 and leave our factory
in safe and perfect condition. To maintain this condition
the operator has to respect the safety measures contained
in this instruction manual.
In order to avoid electrical shock: The safety meas-
ures have to be respected when working with volt-
ages exceeding 120 V (60 V) DC or 50 V (25 V)rms
AC. According to DIN VDE these voltages represent
the threshold contact voltages . Please note: The val-
ues indicated in brackets are valid for limited ranges
such as in hospitals or on farms.
Prior to measurement ensure that the test leads and
instrument are in perfect condition.
The measurement instrument is only to be used for
the specified measurement ranges.
Transport and Storage
15
Werbung
