Unitest UNIdreh 700 Bedienungsanleitung Seite 13

Contents
1.0 Brief Description/Scope of Supply ........................14
2.0 Transport and Storage ..........................................15
3.0 Operator's Safety ..................................................15
4.0 Operation Elements ..............................................17
5.0 Determination of Phase Rotation ..........................19
6.0 Maintainance ........................................................20
7.0 Specifications........................................................21
References and symbols marked on the instrument:
Attention ! Warning, danger. See instruction manual.
Caution ! Dangerous voltages.
Reference. Please use utmost attention.
Double insulated housing Class II IEC 536
Conformity symbol, the instrument complies with the
valid directives. It complies with the EMV Directive
(89/336/EEC), Standards EN 50081-1 and EN 50082-
1 are fulfilled. It also complies with the Low Voltage
Directive (73/23/EEC), Standard EN 61010-1is ful-
filled.
The instruction manual contains information and ref-
erences, necessary for safe operation and mainte-
nance of the instrument.Prior to using the instrument
(commissioning / assembly) the user is kindly re-
quested to thoroughly read the instruction manual
and comply with it in all sections.
Failure to read the instruction manual or to comply
with the warnings and references contained herein
can result in serious bodily injury or instrument dam-
age.The respective accident prevention regulations
established by the professional associations are to be
strictly enforced at all times.
Contents
Page
13