Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Item number 11559
Bicycle rack "AMBER I" for trailer tow bar
Contents
1.
Proper use of the product
2.
Scope of delivery
3.
Speci cations
4.
Tow bar requirements
5.
Safety precautions
6.
Operating instructions
6.1
Mounting the bicycle rack
6.1.1
Mounting the wheel rails
6.1.2
Mounting the lamp mount
6.1.3
Mounting the U-bracket
6.1.4
Mounting the frame holder
6.1.5
Mounting the license plate holder
6.1.6
Laying the electrical cables
6.1.7
Mounting the short tensioning strap
6.1.8
Mounting the plastic cover
6.2
Mounting the bicycle rack on the trailer tow bar
6.3
Mounting the bicycle to the bicycle rack
7.
Maintenance and care
8.
Notes regarding environmental protection
9.
Contact information
WARNING
Please read the operating instructions carefully prior to use and observe all safety instructions!
Not observing such may lead to personal injury, damage to the device or to your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the
product, please include these operating instructions as well.
Please check the contents of package for integrity and completeness prior to use!
1.
Proper use of the product
This bicycle rack is mounted to the trailer tow bar of a car and is designed for the transportation of one bicycle.
This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specia-
list knowledge. Keep children away from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the observance of all information in these operating instructions, particularly the observa-
nce of the safety notes. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damage or personal
injuries. EAL GmbH assumes no liability for damage resulting from improper use.
2.
Scope of delivery
1 x
Base frame
2 x
Wheel rail halves
1 x
Lamp mount set
1 x
U-bracket
1 x
Frame holder, short
1 x
Plastic cover
3 x
Tensioning strap, short
1 x
Safety strap
1 x
License plate holder
1 x
Operating instructions
1 x
Permit
1 x
Padlock with key
8
4 x
Lock screw M6 x 50 [mm]
4 x
Washer 17.8 x 6.5 x 1.1
4 x
Nut M6
1 x
Cross-headed screw M5 x 12 [mm]
1 x
Washer 9.8 x 5.4 x 0.9
2 x
Cross-headed screw M5 x 35 [mm]
2 x
Spring washer 8.1 x 5.5 x 1.2 [mm]
2 x
Washer 9.7 x 5.3 x 0.9
2 x
Lock screw M8 x 60 [mm]
2 x
Washer 15.8 x 8.5 x 1.1
2 x
Knob nut M8
Cable ties
[mm]
[mm]
[mm]
[mm]
8
8
9
9
9
10
10
10
10
11
11
11
12
12
12
12
13
13
14
14
Werbung
