Werbung
Verfügbare Sprachen
Verfügbare Sprachen
˜ Initial use
Push the ON / OFF button 7 per the chart below to switch
the lighting mode:
100 % brightness
50 % brightness
SOS signal
OFF
Focus the beam by pulling or pushing the focus ring 1 .
˜ Using the car adapter
Connect the torch 4 using the USB charging cable 10 to the
car adapter 8 .
Plug the car adapter 8 into the connection socket. The LED
indicator 9 on the car charger 8 will light up red. The torch
4 will charge.
During charging, the LED indicator 5 will flash green. The
LED indicator 5 will light up green as soon as the torch 4
has been fully charged.
˜ Using the power bank
You can also use the charged torch 4 as a power bank. You can
therefore use it as another energy source for different devices with
corresponding connectors such as smartphones. Please note the
required input voltages for the connected devices.
When a device is charged via the USB socket 2 , the LED
indicator 5 lights up red.
˜ Cleaning and care
Never use liquids or cleaning agents, as these will damage
the product.
Clean the product on the outside only with a soft, dry cloth.
12 GB/CY
ON / OFF button
X 1
X 2
X 3
X 4
Werbung
