Werbung
Verfügbare Sprachen
Verfügbare Sprachen
least 24 hours before connecting the electrical power supply, so
that the compressor fluid feed is correct.
Proper air circulation is necessary to avoid overheating. To
ensure
sufficient
recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor,
recommendations.
The appliance should not be placed close to radiators or
cooking hot plates or gas rings.
Check that electrical sockets remain accessible when the
appliance is installed.
Power saving
To limit the electricity consumption of your appliance:
Install
it
instructions").
Leave the doors open as little time as possible.
To ensure that the appliance operates properly, clean the
condenser regularly (see "Maintenance").
Regularly inspect the door seals and ensure that they are
still closing properly. If this is not the case, contact your after-
sales service.
Trouble shooting
Any electrical work should be carried out by a qualified and
skilled technician.
The appliance should be repaired by an accredited repair
centre, using only manufacturer's original spare parts.
ventilation,
condenser).
in
an
appropriate
observe
the
Observe
the
place
(see
installation
installation
"Installation
32
Werbung
