Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Both a manufacturer's type plate (top right) and a sticker with warning notices for
safety handling (on the control panel) are attached to the HR 3000.
All missing warning notices or the type plate must be replaced immediately!
The machine may no longer be used without warning notices or a missing type plate!
A manufacturer's type plate is attached to the HR 3000, as well as a sticker with the following safety signs
in accordance with ASR A1.3:
Symbol
Meaning
Fire, naked flames and smoking prohibited
Precaution statement P 210:
Keep away from heat, hot surfaces, sparks, open flames
and other ignition sources. Smoking prohibited
Do not extinguish with water
Warning of explosive atmosphere
Use respiratory protection
Wear eye protection
Use solvent-resistant gloves
Other important information:
1. Before each use, check that the hoses (except for the drain hose) have been inserted deep into
the containers.
2. Check on a regular basis that the edges of the containers cannot damage the hoses.
3. Check the level in the containers on a regular basis in order to prevent the solvents from
overflowing.
4. Leaks or spills of solvents must immediately be absorbed or wiped up
5. In the event of a fault, switch off the device and the associated compressed air and exhaust air
lines immediately and inform your supplier
6. Ensure that the environment and the workplace itself are kept clean
7. Always wear dissipative personal protective clothing (Section 1.2)
EMM accepts no liability or warranty for any damage caused by non-observance of the manual.
1.2
Personal protective equipment
The user or the operators of the HR 3000 must wear dissipative personal protective clothing according to
the specifications of the safety data sheet (MSDS) of the cleaning fluid used.
EN 166 certified safety glasses
-
EN 374-3 certified gloves
-
6
Werbung
