Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PREPARATIONS
Connection
Plug in the AC power cord to the AC power socket affer all
other connections are made.
7 Connect the speakers to the main unit.
Connect the right speaker to the SPEAKER R terminals
and the left to the SPEAKER L terminals, The speaker cords
with the black stripes go to the © terminals.
2 Connect the supplied antennas.
Connect the FM antenna to the FM 75 Q terminal and the
AM antenna to the AM jack.
3 Connect the AC power cord to an AC power
socket.
The clock will appear in the display.
For setting the clock, see page 7.
Speakers
¢ Do not short-circuit the
and © speaker cord leads.
¢Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
Antennas
Keep antennas away from metallic objects, electrical
equipment and cords.
eFM antenna: Extend fully and position for the best
reception. If reception is poor, connect an optional outdoor
antenna to the FM 75 Q terminal. Note that, when connecting
an optional outdoor antenna, use an adaptor as required.
¢ AM antenna: Rotate to find best reception.
Remote commander
Detach the battery compartment lid at the rear of the remote
commander and insert two R6 (size AA) batteries with correct
polarity.
R6(AA)
¢ Replace the batteries with new ones when the operational
distance between the remote commander and main unit
becomes shorter.
¢ Remove the batteries if the unit is not going to be used for
an extended period of time.
¢ The remote commander may not operate if it is used under
intense sunlight or if its line of sight is obstructed.
Werbung
